DRAFTS open for Public Comment: go to Standards.org.au to obtain copies of the draft
AS 2885.3 (Operations and Maintenance) Closes 01Apr2020.
Standards to be published 'soon'
AS 3862 (External Fusion Bond Epoxy for Steel Pipe) is with the ME-038 Committee for balloting on publishing; balloting closes on 17-Feb-2020. AS/NZS 2885.2 (Welding) Public comment closed 20Jan2020. Comments are being reviewed by the subcommittee. AS 4564 (General Purpose Natural Gas) Public comment closed 23Jan2020. (This standard is not in ME-038's portfolio.)
This wiki has been established to assist users of AS 2885 in understanding the Standard. AS 2885 is the Australian Standard for Pipelines - Gas & Liquid Petroleum. It is supported by the Australian Pipelines and Gas Association (APGA) and the Future Fuels Cooperative Research Centre (FFCRC), with the agreement of Standards Australia.
If you are an Australian pipeline engineer, or other user of AS 2885, we hope find this wiki useful and interesting. If not, you won't find much of interest here; you should go and spend your time on some other website.
The initial content is being contributed by people who were involved in recent revisions of Parts 0, 1 and 6 of AS 2885.
By mid-2020, similar information from Parts 2, 3 and 5 will also be included.
THE AS 2885 SUITE OF STANDARDS
- AS 2885.0 General Requirements
- AS/NZS 2885.1 Design and Construction
- AS/NZS 2885.2 Welding
- AS 2885.3 Operations and Maintenance
- AS/NZS 2885.4 Subsea
- AS/NZS 2885.5 Pressure Testing
- AS/NZS 2885.6 Pipeline Safety Management
The ME-038 Committee Portfolio also includes
- AS 3862 Fusion bond epoxy coating for steel pipe
- AS 4822 Field joint coating
For general information on the process of Standards revisions according to ME-038 Committee: Revisions to Standards
For general Q&A about the overall AS2885 Suite: General / Admin
General Topics - Mostly Part 0
Design Topics - Mostly Part 1
- Pipeline vs Piping
- Pipeline Assemblies
- Critical Defect Length (CDL)
- Pipe Material - non-steel
- Transient Pressures
- Isolation Plan
- Road Crossings
- 0.8 Design Factor
Pipeline Safety Topics - Mostly Part 6
- "SMS" vs "Risk Assessment"
- AS2885 SMS Risk Matrix
- Location Classification
- Secondary Location Classes
- Threats Assessment
- Physical / Procedural Controls
- Consequence Assessments
- External Interference Protection
- Effectiveness of Controls
- One-Call Services
- High Consequence Recognition
Minor typo errors and glitches are listed in these pages.